M2M Tips – Deploying Cellular M2M or IoT Devices in Australia

M2M Tips – Deploying Cellular M2M or IoT Devices in Australia

By James Mack, General Manager at M2M One.

Over the past 15 years the team at M2M Connectivity & M2M One have coached, consulted, celebrated and at times commiserated with thousands of hopeful developers trying to make their mark on the Machine to Machine/Internet of Things landscape.

This series of blog posts is designed to pass on some M2M 101 style tips to developers looking to get into the space.

This week we give some tips to businesses, developers and distributors who are looking to build or import an M2M/IoT solution for use in our backyard, the Australian marketplace.

Traditionally we have dealt with local Australian or New Zealand based developers building products specifically designed to meet some of the unique challenges in terms of coverage, environment and demand in Australia – With the increasing global nature of M2M/IoT we’ve seen our customer base grow to include two interesting new additions:

  • International companies looking to bring their unique solution to the Australian Market.
  • Local Entrepreneurs with a great product idea sourcing or developing hardware using international manufacturers.

This is great because it brings a whole new range of innovation and competition to the local market, but it also brings unique challenges as a majority of these customers are unfamiliar with the intricacies of deploying solutions in Australia.

Mobile Coverage

Australia is unique in terms of geography in that a large portion of the country is relatively unpopulated or uninhabitable while there is some mobile infrastructure that covers these areas around 70% of the countries landmass does not have mobile coverage and can only be covered by Satellite. The closest country in terms of similar mobile coverage disparity is possibly Canada, but the physical geography is quite different.

To give you an idea of the population density and mobile coverage, the country’s largest mobile network operator Telstra covers roughly 28-30% of Australia and 99.5% of the population; the second largest operator Optus covers roughly 13-15% of Australia and 98.5% of the population. Telstra covers roughly an extra 1 million Square Kilometers of the Country to cover an additional 1% of the population.

Most major motorways, truck routes and shipping areas have mobile coverage so you are rarely without coverage, unless you go completely into the ‘bush’.

Mobile Network Operators

Australia has 3 major mobile network operators, with all other providers operating as wholesales or MVNOs for existing infrastructure. ADSL provider TPG has recently purchased some LTE spectrum as has the National Broadband Network (NBN) but neither have announced any long-term plans.

The 3 operators in Australia are:

  • Telstra – The countries largest mobile network covering over 2.3 million square kilometers (roughly 28-30% of the country) and 99.5% of the population.
  • Optus – The countries second largest mobile network covering over 1.3 million square kilometers (Roughly 13-15% of the country) and 98.5% of the population.
  • Vodafone – Vodafone don’t typically publish their coverage statistics, but have recently entered into a 3G tower sharing agreement with Optus so you can estimate that their coverage is similar to Optus.

Operating Frequencies

Australian carriers operate 2G, 3G & LTE networks – CDMA was decommissioned in 2008.

Telstra are following US Carrier AT&T’s model of closing down 2G to re-farm spectrum for LTE/4G and while other carriers have yet to comment we expect them to do the same in time.

Telstra:

  • 2G – 900Mhz (This frequency is being re-farmed for LTE and will no longer be available to 2G devices from December 1st 2016)
  • 3G – 850Mhz/2100Mhz (For the best coverage 850Mhz is a must have)
  • 4G/LTE – Telstra currently operates 5 frequencies for LTE these are listed below. The critical frequencies for all M2M/IoT applications are B3 & B28
    • B1 – 2100Mhz
    • B3 – 1800Mhz (Must have for M2M/IoT)
    • B7 – 2600Mhz
    • B8 – 900Mhz
    • B28 – 700Mhz (Must have for M2M/IoT)

Optus:

  • 2G – 900Mhz
  • 3G – 900Mhz/2100Mhz
  • 4G/LTE – Optus currently operates 6 frequencies for LTE these are listed below. The critical frequencies for all M2M/IoT applications are B3 & B28
    • B1 – 2100Mhz
    • B3 – 1800Mhz (Must have for M2M/IoT)
    • B7 – 2600Mhz
    • B8 – 900Mhz
    • B28 – 700Mhz (Must have for M2M/IoT)
    • B40 – 2300Mhz

Vodafone:

  • 2G – 900Mhz
  • 3G – 900Mhz/2100Mhz
  • 4G/LTE – Vodafone currently operates 3 frequencies for LTE these are listed below. The critical frequencies for all M2M/IoT applications are B3 & B5
    • B3 – 1800Mhz (Must have for M2M/IoT)
    • B5 – 850Mhz (Must have for M2M/IoT)
    • B8 – 900Mhz

Roaming SIMs in Australia

If you are buying SIMs from an international carrier or MVNO it is important to note that Telstra does not allow permanent roaming on their network and can exercise the right to remove services from their network that have been roaming for over 6 months in any 12 month period.

For permanent M2M/IoT applications that require the Telstra network your best option is to speak to M2M One or Telstra directly.

Hardware Approvals

All M2M/IoT hardware using an Australian Mobile Network should be RCM (Formerly A-Tick) approved – This is similar to European (CE) approval and US (FCC) approval. In some cases devices with CE or FCC approval can have approval time and costs reduced.

If a device is being worn on the body in also needs to undergo SAR testing for radiation levels.

Telstra and Optus also have their own approval process, this is not necessary to use their networks but devices using an approved module/modem will often be prioritized with support issues.

IP Addressing

Public IP Address space is limited in Australia and most mobile carriers will not provide any sort of publically addressable IP for M2M/IoT devices. Your best bet is to utilize public Internet access or have a private IP range built on an APN for you.

For more information about IP Addressing – Read our last blog post

Operating Costs

We find that a majority of customers that come from international markets, particularly Europe or Asia find the price of Data, SMS & Voice in Australia quite expensive compared to their home market.

This has long been the case in Australia and local developers have learned to adapt and minimize their costs through efficient use of data. It is therefore important for anyone bringing a solution into Australia that they consider how to best utilize their data allowance.

For example we see a lot of vehicle tracking and telematics applications from China and SE Asia. These are typically more ‘data hungry’ as data is relatively cheap in these markets; most devices typically consume 30MB or data or more a month for normal operations. An equivalent Australian made device would probably consume between 3-5MB of data per month for similar functionality due to price constraints in the market.

There you have it, a quick practical overview on deploying M2M or IoT hardware in Australia. In our next article we will give a more general overview of the Australian M2M market, pointing out the areas that are saturated and those that are growing, from our experience.

James Mack – General Manager M2M One
The views and opinions expressed in this blog post are solely those of the author and do not necessarily reflect the opinions of M2M One or M2M Group.

Related posts